75-ton circulating fluidized bed power plant boiler parameters and case sharing

 A 75-ton circulating fluidized bed medium-temperature and medium-pressure power generation boiler generally refers to a circulating fluidized bed boiler with a rated evaporation capacity of 75 tons, a rated steam pressure of 3.82MPa, and a rated steam temperature of 450°C. Generally, it can burn various types of coal, and it can also burn biomass pellet fuel. It is a large thermal energy equipment used in thermal power plants and industrial waste heat utilization power generation industry. The fluidized bed medium temperature and medium pressure power generation boiler produced by ZBG Group has the following performance characteristics:

75-ton circulating fluidized bed power plant boiler

1. Technical parameters

Furnace type: ZG-75/3.82-M/T

Rated evaporation capacity: 75 tons of steam

Rated steam pressure: 3.82MPa

Rated steam temperature: 450℃

Total weight: 400~600 tons

Combustion efficiency: 97% ~ 99%

Thermal efficiency is about: 86% to 90%

Fuel: anthracite, bituminous coal, lignite, lean coal, biomass pellets, biomass briquettes, biomass straw direct combustion, rice husk, wood/block

Application scope: thermal power plant

2. Performance characteristics

1) Environmentally friendly products: the content of harmful gases such as S02 and NOx in the smoke exhaust can be reduced by about 80% to 90%, which can effectively reduce the pollution of the atmospheric environment caused by coal-fired power generation. ".

2) Patented technology: Adopting the latest scientific and technological achievements of Tsinghua University, it is listed as a major scientific and technological research project of the State Education Commission and the National Science and Technology Achievement Promotion Plan of the Ministry of Science and Technology.