2018-11-07 15:04:02
The advantages of the low nitrogen gas fired boiler series are mainly in the following aspects:
1. Boiler structure is scientific and effective to improve thermal efficiency
Special boiler structure ensures adequate space for reflow of flue gas. The optimization of flue gas pipe layout solves the problem of flue gas velocity after the increase of flue gas volume caused by flue gas recirculation, and the flue gas resistance does not increase significantly compared with the standard products. For larger water volume design, boiler is not sensitive to load fluctuation. The water level in the boiler is stable, further reducing the unstable combustion probability.
2. Condensation technology to reduce harmful emissions
The harmful substances carbon dioxide and nitrogen oxides combine with condensate water to form corresponding acids in the tail flue of condensate waste heat recovery, and discharge with condensate water, which further reduces the content of harmful components carbon dioxide and nitrogen oxides in flue gas and meets the requirements of environmental protection.
3. Easy installation and simple maintenance
There is no special requirement for the installation site and the later maintenance of the system. The flue gas external circulation structure only needs to add the circulating pipe from flue to burner through simple connection; the air volume control, regulation and filtration in this section are handled by the components installed in the burner; the field installation ensures the insulation and reliable fixation, and the condensate drainage outlet is set at the bottom of the pipeline. There is no difference between daily maintenance and standard products.
4. Remote monitoring provides guarantee for safe operation of boilers
The remote monitoring system has the function of intelligent analysis. Users can set various operation parameters of the boiler by computer, grasp the operation status of the boiler in real time, and find potential problems to effectively ensure the safe operation of the boiler.
The so-called fire tube boiler is the flue gas generated after fuel combustion flowing through the fire tube or flue pipe, heating the water, steam or steam-water mixture outside the fire tube or flue pipe.
The 10 ton boiler is a very typical capacity critical point, which can be seen from customer demand data.
During the operation of industrial boilers, users are more concerned about boiler efficiency and fuel consumption of boilers.
Boiler structure is scientific and effective to improve thermal efficiency, condensation technology to reduce harmful emissions.