3 Tons Diesel Steam Boiler With ASME Certification

 Recently, we received an inquiry from an Ecuadorian customer who wanted to purchase a 3 ton steam boiler and asked for ASME Certification. ZBG Group happens to be a professional manufacturer of ASME boilers. ZBG boilers are exported to many countries, and we have many boiler project cases for reference.

3 Ton Diesel Steam Boiler Requirements

1. steam boiler with ASME stamp
2. capacity: 3 ton;
3. Pressure: 1 Mpa
4. Fuel: diesel
5. Burner: modulated
6. burner pilot flame: gas
7. power voltage: 220V – 3 PHASES
8. control voltage: 220V – 60HZ
9. height above sea level: 2500 meters

3 Tons per hour Gas Fired Boiler Exported to Russia

• Mode:WNS3-1.25-Y/Q
• Capacity:3 tons per hour
• Application:Building materials industry

The Customer purchase this 3 tons gas boiler for concrete mixing station project. At present, the equipment has been in normal operation, and customers are very satisfied with our boiler.

After concrete pouring, if the climate is hot and the air is dry, and the maintenance is not carried out in time, the water in concrete will evaporate too quickly, and dehydration will occur, which will make the cement particles that have formed gel body not fully hydrated. In addition, when concrete does not have enough strength, premature evaporation of water will produce larger shrinkage deformation and dry shrinkage cracks. So it is very important to maintain the concrete in the initial stage after pouring, and the steam boiler is the most critical equipment for the steam maintenance of concrete.

WNS series oil and gas fired boiler produced by our company is one of the key export products of our company, can be widely used in production, power generation, heating, hot water supply and other fields. The measured NOx emission concentration is far below 30mg/m3.