6 T/H Gas Fired Boiler Parameters--ZBG

6 T/H Gas Fired Boiler Parameters

2022-09-08 08:36:20

Sr. No.	Parameters	Unit	Value
	Boiler Type		Three Pass Wet Back
	Type of mounting		Saddle mounted

	Number of Boilers		1
1	Model		Marshall C
	Net Steam Generation	Kg/hr	6300
	Boiler Design Pressure	Kg/cm2	14.5

2	Steam Pressure
	Safety valve Set Pressure	Kg/cm2	14.0/14.5

	Feeding Cut Off pressure switch setting	Kg/cm2	113.5
3	Mechanical Details for Boiler*
	Tubes Thickness	mm	3.25
	Tube Diameter	mm	57.15

	Effective length	mm	3563
	Material of Construction		SA 515/516 Gr 70/IS 2002 Gr II

Sr.	Item Description	Qty	Sly	ERC	Superv.

A	Proprietary Supply
1	Oil/Gas Fired Boiler, 6.0 TPH (F&A 100 Deg. C) with Design Pressure of 14.5 kg/cm2(g) Consisting of:-	1 No.	FML	Client	FML

	3 Pass, fully fusion welded boiler shell, fully wet back with stiffening ring furnace, convection smoke tubes, hinged doors with 100mm insulation, sheets, Man hole, Mud hole, ladder, platforms and set of nozzles for mountings
2	HSD fired Pressure Jet Burner Burner consist of:	1 No.	FML	Client	FML
	HSD fired Pressure Jet Burner Burner consist of:

	Force Draught combustion fan	1 no
	Oil Pump and motor	1 set
	Oil Pump and motor	1 set

3	Boiler feed water pump and motor	1 SET	FML	Client	FML
	Centrifugal multistage Pump and motor assembly	1W+1SB
		1W+1SB

	Inlet isolation valves	2 no	Client	Client	Client
	Inlet strainer	2 no	Client	Client	Client
	Inlet strainer	2 no	Client	Client	Client

	Outlet isolation valves	2 no
	NRV	2 no
	NRV	2 no

	Pressure gauge	2 no
5	MCC cum ICP	1SET	FML	Client	FML

	Floor mounting, Non-Compartmentalised confirming to ingress protection class of IP54, made out of 14/16 SWG CRCA sheet. The power section shall be provided with MCCB. Ammeter and voltmeter shall be provided.

SR.NO.	DESCRIPTION	UNIT	VALUE

1	Maximum Steam Output (F&A 100Deg C)	Kg/hr	600 0
2	Maximum Design pressure	Kg/cm2(g)	14.5

3	Steam dryness Fraction	%	98%
4	Efficiency on 100% load (On NCV Basis) as per BS 845 Part I without heat recovery	%	89%