320m2 sintering area of iron and steel plant with 12.8 tons sintering machine waste heat boiler project
1. Meteorological conditions
2. Sintering Process System Parameters
Table 1 Design parameters of main equipment of 320m2 sintering machine
project | unit | parameter | Remark | |
Sintering Machine | Effective area | ㎡ | 324 | |
quantity | tower | 1 | ||
Number of working days | d/a | ≥330 | ||
Utilization factor | t/(m2.h) | ≥1.15 |
Table 2 Parameters of hot air resources used by the large flue of 320m2 sintering machine
Operating conditions | 17# | 18# | 19# | 20# | twenty one# | Average temperature (°C) |
Minimum (°C) | 385 | 365 | 425 | 405 | 395 | 395 |
Normal (°C) | 400 | 420 | 440 | 420 | 410 | 410 |
Maximum (°C) | 415 | 435 | 455 | 435 | 425 | 425 |
The flow rate of each dust control branch pipe m3/h | ||||||
Operating conditions | 17# | 18# | 19# | 20# | twenty one# | total |
Single flue branch flow | 39750 | 39750 | 39750 | 39750 | 39750 | 198750 |
Double flue branch pipe flow | 79500 | 79500 | 79500 | 79500 | 79500 | 397500 |
3. Main design parameters of waste heat recovery device:
serial number | project | unit | value |
1 | superheated steam pressure | MPa | 1.6 (gauge pressure) |
2 | superheated steam temperature | ℃ | 320 |
3 | Rated evaporation | t/h | 12.8 (factory accounting) |
4 | Feed water temperature | ℃ | 151 |
5 | Exhaust gas volume | Nm3/h | 170000 (factory accounting) |
6 | Flue gas side resistance loss | Pa | ≤350 |
7 | boiler efficiency | % | (factory accounting) |
8 | Boiler evaporation area | m2 | (factory accounting) |
9 | Exhaust smoke temperature after waste heat recovery in large flue | ℃ | ≥125 |
For all inquiries, please fill in the form below (* are required) to send us a brief message, and we will get back to you as soon as possible.