ZBG groupWNS4-1.25-YQ complete equipment model specification parameter list--ZBG

ZBG groupWNS4-1.25-YQ complete equipment model specification parameter list

2023-08-03 08:26:13

serial number	device name	Drawing number or model	unit	quantity	Remark
one	Boiler host	WNS4-1.25-YQ	tower	1
two	Auxiliary	matching	set	1
1	water treatment	FULAIKE-4	set	1	Contains resin
2	chimney, flue	Φ400（10m）	set	1	With elbow
3	Sub-cylinder	f325	tower	1
4	Electric control cabinet (LCD display)	HW-PLM-6	tower	1
5	Stainless steel feed water pump		tower	2	Including motor 5.5KW
6	pressure controller	PN2.5 DN15	pieces	3
7	burner	BGN450MC	tower	1	Including motor 7.5KW
8	energy saver	JN-4	tower	1
three	Valve instrument	matching	set	1
1	Three-way plug valve PN2.5DN15	X-14H（PN2.5 DN15）	pieces	2
2	Pressure gauge 2.5 grade M20×1.5	Y-150	pieces	2
3	Pressure gauge trap	TGQB1073-2-0（PN2.5 DN20）	pieces	1
4	Pressure gauge 2.5 grade M20×1.5	Y-100	pieces	2
5	Globe valve PN2.5DN100	J41H	pieces	1
6	Full lift spring safety valve PN2.5DN50	A48H	pieces	2
7	Globe valve PN2.5DN40	J41H	pieces	2
8	Check valve PN2.5DN40	H4T	pieces	1
9	Ball valve PN2.5DN25	Q41F	pieces	4
10	water level controller	UQK-30（PN2.5 DN25）	pieces	2
11	Drain valve PN2.5DN50	P48H	pieces	2
12	Bimetallic thermometer	WSS411	pieces	1
13	Flat water level gauge PN2.5DN15	Q21F-25C	pieces	2
14	Bolts and nuts	8.8 level	set	1	All bolts and nuts for a single boiler
Four	Factory information	matching	set	2
1	Boiler general drawing	matching	open	2
2	boiler foundation	matching	open	2
3	Boiler	matching	open	2
4	Valve Instrument Diagram	matching	open	2
5	Component compressive strength calculation summary table	matching	share	2
6	Installation Manual	matching	share	2
7	Product quality certificate	matching	share	2
8	Boiler Parts List	matching	share	2
9	Copy of manufacturing license	matching	share	2
10	Surveillance inspection certificate	matching	share	2
five	other materials
1	Plate heat exchanger	BR2-1.6-12-E740	tower	1
In addition to the above required materials, all auxiliary materials used for installation (cables, bolts, pipe fittings, pipelines, small parts, instruments) are all provided by the manufacturer. The above is a single boiler list, and the delivery should be in accordance with the list and the required configuration. The configuration delivery of the boiler.

In addition to the above required materials, all auxiliary materials used for installation (cables, bolts, pipe fittings, pipelines, small parts, instruments) are all provided by the manufacturer. The above is a single boiler list, and the delivery should be in accordance with the list and the required configuration. The configuration delivery of the boiler.

Previous: Coal mine production + heating purchase 2 sets of 4 tons gas-fired steam boiler technical parameters

Next: Technical requirements for three 1400kW low-nitrogen natural gas heating boilers

Back