Gas / Oil Fired Power Plant Boiler
Type: Power Plant Boiler Capacity/Hot Power: 20 - 130t/h Pressure: ≤5.29MPa Fuel: Coke Oven Gas, Blast Furnace Gas, LPG, Biogas, Light Oil, Heavy Oil Application: Large-scale Power PlantOverview
Brief Introduction:
Gas and oil fired power plant boiler has lots of advantages such as sufficient burning, no pollution in the emission, convenient operation, easy installation and so on. Such series boiler has the features such as high thermal efficiency, high output, better load adaptability, high degree of automation, easy operation as well as safe and reliable operation. It is an ideal environmental-protection green product with high efficiency, low energy consumption and less pollution.
Application:
Gas and oil fired power plant boiler is mainly used for large-scale power plant etc.
Features:
- It adopts mechatronics control equipment and (PLC) combined control mode. It uses the advanced programmable logic controller (PLC) as the “CPU” of control system. The control system is operated through the touch screen to greatly improve the boiler’s automatic control level and operation reliability so that the operation is more simple and convenient.
- The scientific product design, advanced processing technology and strict quality control make the boiler’s continuous operation life up to 10 years.
- The reasonable design for the combustion chamber of the boiler completely adapts to city gas, natural gas, light diesel oil, heavy oil and other fuels. The fuel is completely burned with micro-positive pressure in the furnace. There is little flue gas pollutant produced during the combustion. The blackness of the boiler’s flue gas and smoke dust, concentration, noise and other technical index of the boiler meet national environmental requirements. It realizes the goal of clean combustion, no pollution in the emission, easy operation, high output.
Related Power Plant Boiler Types
Parameters
Model | Rated Steam Capacity | Rated Steam Pressure (bar) | Rated Steam Temperature (℃) | Feed Water Temperature (℃) | Fuel Type | |
t/h | BHP | |||||
DHS25-2.5/400-Q | 25 | 1915 | 25 | 400 | 105 |
Heavy oil & Light oil & natural gas & Coke oven gas & blast furnace gas & liquefied petroleum gas & Dry oil & residual oil Refinery dry gas |
DHS30-3.0/400-Q | 30 | 2298 | 30 | 400 | 105 | |
DHS35-3.0/400-Q | 35 | 2681 | 30 | 400 | 105 | |
SHS20-2.5/400-Q | 20 | 1532 | 25 | 400 | 105 | |
SHS30-3.82/249-Q | 30 | 2298 | 38.2 | 249 | 105 | |
SHS35-3.0/400-Q | 35 | 2681 | 30 | 400 | 105 | |
ZG-20/3.82-Q | 20 | 1532 | 38.2 | 450 | 105 | |
ZG-20/4.2-Q | 20 | 1532 | 42 | 400 | 105 | |
ZG-25/3.82-Y(Q) | 25 | 1915 | 38.2 | 450 | 105 | |
ZG-35/3.82-Y(Q) | 35 | 2681 | 38.2 | 450 | 105 | |
ZG-45/3.82-Y(Q) | 45 | 3447 | 38.2 | 450 | 150 | |
ZG-60/3.82-Q | 60 | 4596 | 38.2 | 450 | 105 | |
ZG-65/3.82-Q | 65 | 4979 | 38.2 | 450 | 105 | |
ZG-70/10.5-Q | 75 | 5745 | 105 | 510 | 110 | |
ZG-75/3.82-Q | 75 | 5745 | 38.2 | 450 | 105 |
Case
1 Ton Gas Steam Boiler in Chile
Type:WNS1-1.0-Q Capacity/Hot Power:1 Ton/hr Pressure:10 Bar, 150 Psi, 1.0Mpa Application:Rubber Vulcanization Project site:Chile view all content- Type:WNS1-1.0-Q Capacity/Hot Power:1 Ton/hr Pressure:10 Bar, 150 Psi, 1.0Mpa Application:Rubber Vulcanization Project site:Chile
- Type:wns series Gas Steam Boiler Capacity/Hot Power:15 ton Pressure:1.25MPa Application:tire factory Project site:Pune
- Type:Gas Steam Boiler Capacity/Hot Power:70 tons Pressure: Application:Heating supply Project site:
- Type:wns series Gas Steam Boiler Capacity/Hot Power:8 ton Pressure:1.25MPa Application:food factory Project site:Israeli
- Type:WNS3-1.25-Y/Q Capacity/Hot Power:3 tons Pressure:1.25MPa Application:Building materials industry Project site:Russia
Get An Instant QuotationGet a tailored solution >>
For all inquiries, please fill in the form below (* are required) to send us a brief message, and we will get back to you as soon as possible.